hhClick for Bakewell-White Gallery          mnnnnClick for Contact Information

Currently On The Drawingboard

Project 0719
New 32m Composite Staysail Schooner

32m Schooner
LOA 32.00m
DWL 24.40m
Bmax. 6.30m
Draft 3.00m
Disp. 68,000kg

The vessel is for a UK client who is stepping up from his current 75ft cutter. To be built from composites by Hakes Marine in Wellington New Zealand, with the interior being completed in China and shipped in modules for installation. At 68 tonnes the vessel is fairly light displacement and combined with her generous sailplan and ballast all contained in a large bulb, points to good sailing performance.

The owner is sailing oriented and often skippers the boat himself, including racing. The vessel will have a paid skipper and crew of five and will be based in Asia for much of the time, although the Med and Carribean are also target destinations.

 

Project 0717
12.5m PHRF Racer

This design is being developed for a group of Auckland based sailors who are looking at building a new boat to challenge for line honours in the 'hot' 40ft L Division of the Royal NZ Yacht Squadron and also for National events using IRC and PHRF systems. The yacht is also to be Cat1 capable to allow the owners to compete in the annual races to the Pacific.

Project 0648
17.60m Self-Righting Access Craft at Q-West
A specialist vessel to access gas platforms off New Zealand's Taranaki coast in all weather conditions. The vessel is being designed to be self-righting and capable of operation inside a hostile atmosphere.

Built to Lloyds of aluminium and powered by Series 60 MTU diesels coupled with Hamilton waterjets with the Blue Arrow control system, the vessel will cruise in excess of 25kts.

Copyright © Bakewell-White Yacht Design, 2007i All rights reserved